Detection Probability Estimation of Directional Antennas and Omni-Directional Antennas

This paper studies the problem of detection of directional antennas and omni-directional antennas by hostile detection systems. We present a model for calculating the probability of detecting a transmitter at arbitrary location around the transmitter. Our study shows that, if a directional antenna employs the same transmit power as an omni-directional antenna, the directional antenna can not decrease the probability of being detected. In some scenarios, a directional antenna is more likely to be detected than an omni-directional antenna. However, if a directional antenna provides the same Effective Isotropic Radiated Power in the direction of the receiver as an omni-directional antenna, the transmit power needed by a directional antenna to send data is much less than that of an omni-directional antenna. In this scenario, the probability of detecting a directional antenna is reduced by over 90%. This reveals that directional antennas can be used to build a secure path to send data at low probability of being detected by adversaries.     

CFD model performance benchmark of fast filling simulations of hydrogen tanks with pre-cooling

High gas temperatures can be reached inside a hydrogen tank during the filling process because of the large pressure increase (up to 70–80 MPa) and because of the short time (∼3 min) of the process. High temperatures can potentially jeopardize the structural integrity of the storage system and one of the strategies to reduce the temperature increase is to pre-cool the hydrogen before injecting it into the tank. Computational Fluid Dynamics (CFD) tools have the capabilities of capturing the flow field and the temperature rise in the tank. The results of CFD simulations of fast filling with pre-cooling are shown and compared with experimental data to assess the accuracy of the CFD model.     

Temperature wave‐trains of periodically forced networks of catalytic reactors

Networks of N identical catalytic reactors with periodically switched inlet and outlet sections are studied for first‐order irreversible exothermic reactions. Switching strategies with inlet and outlet sections periodically jumping a fixed number n_s of reactors are considered and the mechanisms governing the formation of traveling temperature wave‐trains are analyzed as n_s and N are varied. To this aim, a geometric approach to the analysis of the network energy balance is developed. Based on this approach, infinite domains of traveling temperature wave‐trains are predicted for any n_s and N. Analytical approximations are derived for the stability limits and the spatiotemporal patterns of these regimes. Stability boundaries predicted analytically include for any solution the largest part of the stability region computed by numerical simulation. Moreover, good agreement is found between the structure of the spatiotemporal patterns computed numerically and that predicted based on the proposed approach. © 2011 American Institute of Chemical Engineers AIChE J, 2012     

Isolation of red wine components with anti-adhesion and anti-biofilm activity against Streptococcus mutans

Red wine is a widely consumed beverage with multiple beneficial effects on human health. In the present paper, the anticaries properties of red wine were studied in vitro and ex vivo. Our in vitro findings shows that dealcoholised red wine, besides exerting antibacterial activity, strongly interferes with Streptococcus mutans adhesion to saliva-coated hydroxyapatite (sHA) beads, promotes its detachment from sHA, and powerfully inhibits in vitro biofilm formation. The main components responsible for such activities were found to be proanthocyanidins. The ability of red wine to inhibit ex vivoS. mutans biofilm formation on the occlusal surface of natural human teeth also was demonstrated.     

A synthesis methodology for AMS/RF circuit reliability: Application to a DCO design

Circuit ageing degradation is becoming worse in advanced technologies, while application fields like military, medical and energy demand more reliability. Thus, reliability is one of the most important challenges of the semiconductor industry [1]. In this work, we review the physical ageing phenomena, their simulation model, and how they can be avoided. Then, we propose a synthesis methodology composed of classical circuit optimization with the reliability analysis in earlier stages. Also, the variability of the integration process technology is taken into account. We compare a classical and a reliable designed digital controlled oscillator (DCO) in order to show a reduction of 16% in the oscillation frequency ageing degradation. In this way, the reliable design makes the circuit lifetime five times longer, if we fix the maximum frequency ageing degradation at 2.0%. Finally, we present the reliability as a design criterion, advantages and disadvantages of our methodology.     

OSPF routing with optimal oblivious performance ratio under polyhedral demand uncertainty

We study the best OSPF style routing problem in telecommunication networks, where weight management is employed to get a routing configuration with the minimum oblivious ratio. We consider polyhedral demand uncertainty: the set of traffic matrices is a polyhedron defined by a set of linear constraints, and a routing is sought with a fair performance for any feasible traffic matrix in the polyhedron. The problem accurately reflects real world networks, where demands can only be estimated, and models one of the main traffic forwarding technologies, Open Shortest Path First (OSPF) routing with equal load sharing. This is an NP-hard problem as it generalizes the problem with a fixed demand matrix, which is also NP-hard.     

Measuring and Predicting Object Importance

How important is a particular object in a photograph of a complex scene? We propose a definition of importance and present two methods for measuring object importance from human observers. Using this ground truth, we fit a function for predicting the importance of each object directly from a segmented image; our function combines a large number of object-related and image-related features. We validate our importance predictions on 2,841 objects and find that the most important objects may be identified automatically. We find that object position and size are particularly informative, while a popular measure of saliency is not.     

Middle distillates from hydrocracking of FT waxes: Composition,characteristics and emission properties

A light cobalt catalyzed Fischer–Tropsch (FT) wax was subjected to hydrocracking in the range of temperature 319–351 °C and hydrogen pressure between 3.5 and 6.0 MPa. The catalyst used was platinum on amorphous silica–alumina. Hydrocracking reaction led to an increase of middle distillate yield up to 85% with a contemporary increase of iso-paraffins concentration which resulted in a remarkable improvement of cold flow properties of the products. The freezing point of C₁₀–C₁₄ fraction passed from ?23 to ?45 °C while the pour point of C₁₅–C₂₂ fraction decreased from 13 to ?23 °C. The latter fraction displayed high cetane numbers ranging between 75 and 80. Changes in carbon distribution and molecular structure of products during hydrocracking have been rationalized in the light of the accepted hydrocracking mechanism where n-paraffins undergo to consecutive isomerization reactions leading to isomers with progressively higher branching degree and concomitant cracking reaction. Experimental evidences support the view that apparent reactivity of n-paraffins is chain length dependent, increasing with the molecular weight. Detailed characterization by NMR and GC showed that branching groups abundance in the middle distillate products was the following: methyl ? ethyl > propyl.Emission tests carried out with FT diesel and commercial ultra low sulfur diesel showed that FT diesel has excellent combustion properties and leads to a reduction of emissions.     

Correction to Lombardo and Foschi (2003).

Reports an error in the original article by G. P. Lombardo and R. Foschi (History of Psychology, 2003, 2, 123-142). In the reference list, several works by Pierre Janet were identified as being Paul Janet. The correct references are provided, where Paul Janet is identified by the initial P. and Pierre Janet is identified by the initials P. M. F.. (The following abstract of this article originally appeared in record 2003-03729-003.) Since the 1920s, the road to the acknowledgment of personality psychology as a field of scientific psychology that has individuality as its object began with the founding of the discipline by Gordon W. Allport. Historians of psychology have made serious attempts to reconstruct the cultural, political, institutional, and chronological beginnings of this field in America in the 20th century. In this literature, however, an important European tradition of psychological studies of personality that developed in France in the 2nd half of the 19th century has been overlooked. The aim of this article is to cast some light on this unexplored tradition of psychological personality studies and to discuss its influence on the development of the scientific study of personality in the United States. (PsycINFO Database Record (c) 2010 APA, all rights reserved)